In
today’s age, most of the people use central air conditioners,
especially those who are living in warm climate areas. A lot of
people think that for installing a central air conditioner, a
contractor should be hired first. Well, this is not the only thing
you need to do. Some other considerations are there which must be
followed for accomplishing such a project in a smooth way.
You
must hire an electrician first to make sure that all electrical cords
are connected properly and there is no chance of a short circuit. There
is one more thing which you must take into consideration, and it is
about checking out the building codes in a proper manner to make sure
that you are in compliance and it is safe to install a central air
conditioner in your house.
Here,
in this article, you will come to know about the steps which one
should follow for installing central air conditioners. Professionals
for Central
air conditioning Yonkers
and even from other locations are expert in this task, and one can
depend on them for installing these items in their houses. But before
we proceed towards the steps which should be taken for accomplishing
such types of assignments, you must know about the types of central
air conditioners available in the market now. So, without wasting
much time, let’s have a look at those types below.
Types
of central air conditioners –
Homes
and business houses can avail of a number of air conditioners. Let’s
have a look at them –
-
Split systems:
This
is the most popular type of central air conditioner. It is split
because it utilizes both indoor and outdoor components. Inside the
conditioner, there is a blower and an evaporated oil.
On the other hand, on the outside, it is the air conditioner which most
of people think. A refrigerant line connects the system. This
type of cooling system is very effective, and it is liked by most people.
-
Heat Pump:
Heat
pumps are another type of split system air conditioners. Instead of
using the furnace and air conditioner, this heat pump supplies cooling
air in the summer and heat in the winter. This type of AC has air
handlers inside. Air source extract heat into outdoor air depending
on the heating and cooling requirements.
-
Packaged Air Conditioner:
Packaged
air conditioners combine both a heat pump and an electric air
conditioner. These types of units are placed on the top of the
rooftop or outside the commercial building or home. This conditioner
is used both as a heat pump and as a cooling device. These types of
air conditioners are used for commercial buildings mainly. They have
installation flexibility and releases less carbon footprint in the
air.
-
Ductless Mini Split Air Conditioners:
These
systems are an excellent choice for cooling a commercial building and
home. While other types of systems require ductwork to release cool
air in the air while the ductless system does not require such type of
things. This ductless system has an outdoor air conditioner which is
connected to air handling units which can be placed in one or more
rooms of the building or home. These types of air handlers possess
greater control over temperature and energy use.
Therefore,
these are the types of central air conditioners. Now it’s time to
have a look at the steps which should be followed for installing
central air conditioners. In fact, central
air conditioning Yonkers
followed these steps the right way.
Step
1#
The
very first step is to plan and install the ducts. You need to use the
floor plan of your home the right way to find out the place where you
can install the ducts. The aim is to make sure that you have enough
space for installing the ducts and easy access areas.
Step
2#
Place
the air handler near condensation drain. However, you need to pay
attention to the manufacturer’s guidelines, but in general, air
handlers should be installed in the basement. The handler is run
outside the home, and it is away from the foundations.
Step
3#
At
this stage, one needs to install the compressor. If you are thinking
of hiring an electrician, this is the place where you may need their
assistance or help. However, here also, it is important to follow the
manufacturer’s instructions.
Keep
one thing in mind that the compressor should be placed 10 to 12
inches away from the building. Make sure you switch off the mains of
your home before starting it. The compressor needs to be placed on
the top of a flat leveled plastic.
Step
4#
Drill
holes in the wall and connect the compressor to the mains.
Step
5#
Once
you connect the compressor, make sure it is capable of carrying the
load. Make sure the installation is done the right way, and it is
safe to use.
Therefore,
these are the steps which should be followed for installing central
air conditioners both in homes and commercial buildings.
