Steps We Should Follow for Installing Central Air Conditioning

In today’s age, most of the people use central air conditioners, especially those who are living in warm climate areas. A lot of people think that for installing a central air conditioner, a contractor should be hired first. Well, this is not the only thing you need to do. Some other considerations are there which must be followed for accomplishing such a project in a smooth way.

You must hire an electrician first to make sure that all electrical cords are connected properly and there is no chance of a short circuit. There is one more thing which you must take into consideration, and it is about checking out the building codes in a proper manner to make sure that you are in compliance and it is safe to install a central air conditioner in your house.

Here, in this article, you will come to know about the steps which one should follow for installing central air conditioners. Professionals for Central air conditioning Yonkers and even from other locations are expert in this task, and one can depend on them for installing these items in their houses. But before we proceed towards the steps which should be taken for accomplishing such types of assignments, you must know about the types of central air conditioners available in the market now. So, without wasting much time, let’s have a look at those types below.

Types of central air conditioners –

Homes and business houses can avail of a number of air conditioners. Let’s have a look at them –

• Split systems:

This is the most popular type of central air conditioner. It is split because it utilizes both indoor and outdoor components. Inside the conditioner, there is a blower and an evaporated oil.

On the other hand, on the outside, it is the air conditioner which most of people think. A refrigerant line connects the system. This type of cooling system is very effective, and it is liked by most people.

• Heat Pump:

Heat pumps are another type of split system air conditioners. Instead of using the furnace and air conditioner, this heat pump supplies cooling air in the summer and heat in the winter. This type of AC has air handlers inside. Air source extract heat into outdoor air depending on the heating and cooling requirements.

• Packaged Air Conditioner:

Packaged air conditioners combine both a heat pump and an electric air conditioner. These types of units are placed on the top of the rooftop or outside the commercial building or home. This conditioner is used both as a heat pump and as a cooling device. These types of air conditioners are used for commercial buildings mainly. They have installation flexibility and releases less carbon footprint in the air.

• Ductless Mini Split Air Conditioners:

These systems are an excellent choice for cooling a commercial building and home. While other types of systems require ductwork to release cool air in the air while the ductless system does not require such type of things. This ductless system has an outdoor air conditioner which is connected to air handling units which can be placed in one or more rooms of the building or home. These types of air handlers possess greater control over temperature and energy use.

Therefore, these are the types of central air conditioners. Now it’s time to have a look at the steps which should be followed for installing central air conditioners. In fact, central air conditioning Yonkers followed these steps the right way.

Step 1#

The very first step is to plan and install the ducts. You need to use the floor plan of your home the right way to find out the place where you can install the ducts. The aim is to make sure that you have enough space for installing the ducts and easy access areas.

Step 2#

Place the air handler near condensation drain. However, you need to pay attention to the manufacturer’s guidelines, but in general, air handlers should be installed in the basement. The handler is run outside the home, and it is away from the foundations.

Step 3#

At this stage, one needs to install the compressor. If you are thinking of hiring an electrician, this is the place where you may need their assistance or help. However, here also, it is important to follow the manufacturer’s instructions.

Keep one thing in mind that the compressor should be placed 10 to 12 inches away from the building. Make sure you switch off the mains of your home before starting it. The compressor needs to be placed on the top of a flat leveled plastic.

Step 4#

Drill holes in the wall and connect the compressor to the mains.

Step 5#

Once you connect the compressor, make sure it is capable of carrying the load. Make sure the installation is done the right way, and it is safe to use.

Therefore, these are the steps which should be followed for installing central air conditioners both in homes and commercial buildings.