Step by step guideline for basic split system repairs

Let’s accept it, regular maintenance of AC can not only become an extra headache but also an additional cost regularly which often we don’t like to pay. Hence leaving the split system untreated for ages before it starts showing alarming signs of huge repair or even replacement. Well, to avoid that regular servicing is necessary but if you are ready to take that extra hassle at home to do the basic split system repairs, then doing it at home isn’t a Greek task and can obviously save you from paying that regular servicing bill.

Let’s look into some of the basic issues faced in a split system AC:

Ø  Worn out electrical connections.

Ø  Disturbance in the compressor.

Ø  Overheating or failure of motor leading to its non-working.

Ø  Filter and coils clogged with dirt.

Ø  Spike in energy bills.

Ø  Warm air being blown out.

All these issues can be attempted to solve by your own self at basic level provided you have some basic knowledge with electrical appliances.

Guide for basic split system repair:

First things first, many times the problem lies in the fact that the Split system repair process would be as basic as cleaning the system. At times clogging of pores and coils cause the system to not work properly. Along with that warm air, disturbed electrical connections, etc can be detected in this process itself.

1. Disconnect the system from power source: Its very crucial to make sure that the machine is not connected to any power before doing any split AC repairs in order to avoid any sort of electrical mishap.

2. The capacitor grille: At first the Capacitor grille needs to be removed. This can be done using a proper size screwdriver or any basic knife.

3. Filter cleaning: After this the filer can be spotted covering the panel coils. After you find this, put the filter in a bowl filled with chlorine and soap water. It should be washed extremely well to remove any dirt or mould then should be left to dry.

4. Cleansing of coils: After the filter is being cleaned, now the evaporator coils should be vacuumed and brushed entirely with care to ensure removal of all sorts of dirt and clogged particles from the coils.

5. cleaning of the lower half: After cleaning all these parts, install the machine back into its position. With the help of a hard bristle brush, clean the bottom half of the split system in order to remove all the dirt and clogged parts.

6. Avoiding growth of scurf: After all, these steps, it is crucial to put in a spoon full of bleach in order to avoid any sort of further scurf growth in the split system.

Diving in specific issues for split system repair

Even after a proper cleaning, sometimes some specific problems seem to persist. Well that is when it’s time to repair these specific problems. Specific Split system repair can be addressable to one or multiple issues as well. It is first crucial to detect what exactly is the problem caused by the system in order to repair them.

Below some specific common problems would be discussed along with some basic step by step guide:

·         Warm air is being sent out by the AC-

There are few things which needs to be checked. Firstly, check if the Thermostat is set at a temperature lower than 5 degree Celsius compared to the room temperature. Check the cooling effect by decreasing it further if required. If there is no change even after this within 15-20 mins, make sure that the condenser is cleaned and there isn’t any leakage. If any of these don’t help, its time to call for servicing.

·         Split AC isn’t turning on-

First check the obvious power supply. Then look for the mode set in the thermostat. It has to be cool. After that figure out if there are any torn, faulty electrical wires or chipped off mice wires. Check for any fuse problem in the power supply of the house. If things still don’t change, call for split system repair servicing.

·         The fan fitted in the splits isn’t working-

figure out if there is a disconnection caused between the power supply among the internal machines of the AC i.e. weather the fan is receiving the power to run. Many times, the fan stop working due to accumulation of ice in internal coils which needs to be treated. Call for maintenance if the problem isn’t solved.

·         Fungal growth in the split system-

Fungal growth or mound can be extremely harmful for both health and the life duration of the split AC. If the problem is still isn’t solved after cleaning, it’s better to call for an expert split system repair service.

These were some of the basic step-by-step split system repair guidelines which one can try out in order to do the basic repair. However, regular servicing and expert solution is something which one must always look for. 

Heat pump repair: Advantages and disadvantages

Climatic conditions in the Northern countries make it impossible to survive without any external heating machine. In order to moderate and mediate extreme climatic conditions, Heat pumps are used. These machines act as a huge alternative to the traditional heating machines which required a huge amount of electricity and maintenance.

Heat pumps basically operate on the concept of evaporation and condensation. It uses refrigerant as a substance in order to run this entire process. Most of the countries use this in order to avoid extreme cold temperatures and so that their home stays warm. However, during summers, the same process can be used in reverse in order to keep the rooms cool. Heat pumps are essentially found in three types: Geothermal, water source and the most common one used is air-to-air.

Let’s check out the advantages of heat pump repairs:

The advantages of Heat pump repair

Heat pumps are extremely durable and can have life expectancy up to 15 years. Proper maintenance of the equipment is necessary in various factors.

1. Peak operation level: Heat pumps generally consume minimum amount of energy. However, when it is not maintained regularly, the dirt, loose connections, faulty airflow system and finally loose connections may lead to consumption of extra energy increasing bills and lowering its operating level.

2. Enhanced life span: Minor issues are often not visible in a heat pump. But these minor issues add up to some major operational issues and energy consuming problems which may decrease the life span of the heat pump. Time to time Heat pump repair and maintenance will lead to resolving of any minor issues which are generally overlooked.

3. Inspection of the ductwork: Ductwork, also known as the network by which air is circulated throughout the house needs visual inspection in order to find out any failures and faults in that system. This is kept in regular check when the heat pumps are regularly maintained.

4. improved air quality: Heat pumps supply purified air into the rooms due to the filter it has attached removing all the impurities. However, if it is not repaired regularly, it may lead to clogging of the filter due to the air gets accumulated with bacteria, dust, pollen grains, etc. in order to avoid this the filter needs to be cleaned in regular basis to ensure improved air quality.

5. Repairs at lower cost: When heat pumps are regularly not repaired, minor issues which are often not visible add up to some major drawbacks. Thus, leading to some huge maintenance bills which could have been avoided as minor repairs cost extremely less.

6. The safety measures: Heat pumps use huge amount of electricity which comes to the fact that it does emit minimal amount of carbon monoxide. If the Heat pump repair is not done regularly, it may lead to excess amount of these harmful odorless chemicals release which is extremely dangerous. Thus, regular maintenance helps to keep safety in check.

Now that you’re well aware of the advantages, let’s get you through the disadvantages of it:

Disadvantages of the Heat pump repairs

1. Not so cost effective: After few years, the machines tend to require more frequent maintenance. Maintaining it each time may not seem very cost effective when calculated in a long-term basis. They often lead to huge bills and are extremely frequent.

2. Time consuming: Heat pump repair goes through multiple steps. The procedures are extremely time consuming and frequent requirement of the same is something not very comfortable to the families. These repairs may consume a whole day which means a whole day facing extreme climatic conditions.

3. Hike in energy consumption: When heat pumps are regularly maintained, after a point of time, it starts to consume more energy. Though proper maintenance lead to reduction of energy consumption, when analysed in the long term, regular repair leads to increase in consumption of the machines up to 15%.

4. Safety at check: When the maintenance that is to be done is a regular schedule and not an emergency, the workers often tend to overlook and speed up the whole process in order to make the machine going which may often lead to some shortcuts done which may cost the safety. Rather, had it been an emergency repair, the workers are often found to be more cautious.

In a nutshell

Despite all the advantages and disadvantages, there are some mishaps which can never really be avoided. Such as the question of sustainability, that weather the machines will actually last long in spite of all the repairs done?

Or in areas which are prone to dust, air is often not 100% pure no matter how much clean the filter is. Yes, the water source or geothermal version is there but there are extremely costly.

Keeping all these things in mind, the question remains one, is it worth? Well the answer is said by all. It is. In spite of all the hassles it comes with, Heat pumps have been one of the best alternatives to the traditional heating/cooling devices in terms of cost, effectiveness, sustainability, etc.